The Pro-Body Jig is an adjustable tool designed to accurately create new axle holes and a lower center of gravity by using a hand drill on BSA and Pine-Car kits derby kits.  The required #44 drill bit is included.  This tool is not recommended for use with slots.

#1.   The Pro Body jig increases the accuracy of the body block by locking all 4 axle points together in 1 setting.

#2.   The Pro Body Jig is fully adjustable for any wheel from the B.S.A. standard to a fully extended wheel base for maximum performance.

#3.   The Pro Body Jig is designed to help the builder minimize ground clearance and gain lower weight placement. (will not work with slots)

#4.   The Pro body Jig has off set drill guide holes for a raised hole option.